Blogpie474

Delivery EC/EU/Worldwide. UniProg SERIAL 11/12/13 = Software Upgrade / Replacement Disks. Packed with all the above software on 2x DVD Data Disks over 7GB of software. Due to size of software this is only available by mail order. Set of 3 Software Disks for SERIAL 11/12/13 interfaces. Short tutorial explain how save changes in ECU:SEQUENT 24 (MY07, MY08, MY09, MY10, MY11, MY12)SEQUENT 56SEQUENT FASTSEQUENT FLYFASTLESSPLUG&DRIVEMTM ECO DRIV. Hi, has someone got BRC calibration tool? I need it for sequent 32 system. And then, why in the BRC plug & drive I can't select nothing than the gauge alignment? I can't do map adjustment, ecc, nothing.

Sequent 32 OBD

LPG and CNG conversion system for sequential injection vehicles

Featuring IN03 MY09 injectors, Sequent 32 OBD system is intended for LPG and CNG conversion of spark-ignition engines up to 4 cylinders. Designed to deliver superlative performances, this kit retains the key features of BRC gaseous injection systems, well-known on the market, assuring the highest level of driveability and reliability.

Gaseous phase filter – LPG

• IN and OUT gas fitting ø 12,5 mm
• Cartridge material glass fiber
• Working Pressure 0 ÷ 4,5 bar
• Operating temperature: -40 °C ÷ 120 °C
• Approval: R67-01 and R110

PT – MAP gas sensor low pressure LPG/CNG

• n° 3 sensors: gas pressure, gas temperature and MAP
• Integrated connector
• Working pressure: 0.2 ÷ 4 bar
• Working pressure (MAP): 0,2 ÷ 2,5 bar
• Temperature sensor: 10 kΩ
• Operating temperature -40 °C ÷ 120 °C
• Gas Pipe-holder: 12 mm
• MAP Gas Pipe-holder: 5 mm
• Approval: R67-01 – R110

Pressure Gauge – CNG

• CNG pressure sensor
• ø outside 50 mm
• Operating temperature: -40 °C ÷ 120 °C
• Working range 0-260 Bar
• Working voltage from 5 to 10 V
• Connector Tyco Superseal 3 ways
• Fixing M12
• Approval: R110

Genius Max reducer – LPG

• Diaphragm single-stage type building
• Water Temperature Sensor
• Adjusted pressure: 150 kPa relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Genius MB reducer – LPG

• Diaphragm single-stage type building
• Water Temperature Sensor
• Adjusted pressure: 800, 1.200 or 1.500 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Sequent 32 Evo OBD gas ecu LPG/CNG

• Automotive microprocessor 16 bit – 24 MHz
• Watertight through (IPX9K)
• According to automotive norms for protections and input/output signals
• Operating voltage: 8 V ÷ 16 V
• Maximun voltage: 24 V
• Current in stand-by: <5 μA
• Sensors and actuators diagnosis compatible with EOBD
• Communication and reprogramming with PC through K-line
• It supports KWP2000 communication protocol
• It supports CAN BUS 2.0 communication and K-line
• EMC compliant
• ECU: up to 4 injectors
• Integrated injectors cut and emulation
• Approval: R67-01, R110 and R10

MS Zenith reducer – CNG

• Mono stage type with diaphragms
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R110

BRC IN03 MY09 electroinjector LPG/CNG

• Floating shutter with ultra low friction
• Impedance: 1,66 / 1,7 mH a 20 °C
• Temperature: -15°C ÷ 120 °C
• Voltage: 6 V ÷ 16 V
• Seal: Rubber on metal
• Approval: R67-01 and R110

Zenith reducer – CNG

Brc Sequent 32 Software Crack Free

• Double stage type with diaphragms
• Water Temperature Sensor
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Δp adjustable between 2.000 and 2.500 mbar
• Approval: R110

One Touch changeover switch

• SMD single-stable changeover switch
• ø outside 26 mm
• Possible installations:
– built-in with ø 23 mm hole and 2 mm dimension
• With integrated Acoustic indicator (buzzer)
• N° 4 green Leds for level indication
• N° 1 bi-colour (green/red) Led for mode working indication

Technical features

Brc Sequent 32 Software Crack Download

(*) For using CNG Timing Advance Processors please make reference to respective Sequent systems handbooks
(**) Required only for specific vehicles model